Steps of furniture production

Steps of furniture production and its components

Steps of furniture production

Steps of furniture production
Coil construction (carpentry part)

In the first stage, the wood is prepared in the form of timber and enters the carpentry section. In this section, the timber is cut into the required pieces by special carpentry machines and the design and pattern are done on them. Some models of royal sofas are also made by hand inlay. The carpenter uses them according to the type of product produced. For example, Russian wood is used to produce the interior coil of a sofa, and beech or alder wood is used for its facade.

Types of wood used in furniture

Nowadays, in making all kinds of sofas, especially steel and classic and comfortable sofas, wood or wood products such as MDF, chipboard and is being used. Leather, fabric and wood in different proportions are usually used in the design of such sofas. Since wood has a role in furniture design and forms the basis of the work, the quality of the furniture is completely related to the type of wood and the skeleton of the work (coil). Poor quality coils will cause problems in the future.
Steps of furniture production

Painting in furniture production

After making the furniture coil, if a part of the furniture needs to be painted, it should go to the painting part and be painted.

After spraying the color, Super Polyester is also used for color stability and beauty.

Fabric cutting and sewing in furniture production

After painting, it is time to cut the fabric and sew.

Sofa upholstery in furniture production

After the upholstery of the sofa (carpentry and painting) was presented, as well as sewing and cutting the fabrics, it was time to nail the upholstery. At this stage, the procedure has a very important role in cleaning the work, but the most difficult stage of the procedure is this procedure.

Roofing in the production of furniture should use foam and sponge with appropriate sizes to create comfort and beautiful appearance in the sofa.
Steps of furniture production

Foam in furniture production:

Made from a combination of special chemicals with a specific ratio in the furnace, There are different types of foam and have different qualities due to their various constructions. They have a longer life than ordinary sponges.

Foams used for furniture: hot foam, cold foam, special foam. The thickness of the foam can be 10 or 13 or 15 cm, regardless of its material.

Sponge in furniture production

It is used in different thicknesses for most pieces of furniture. For example, thin sponges are placed on the handles of the sofa and behind the sofa. In the floor of the furniture, in many cases, sponges called 30 kg sponge or urethane sponge are used, which means 30 kg (in some cases 25 or 20 kg) density of the sponge. The higher the density of the sponge, the longer it will last on the floor. Urethane is also a type of sponge that is currently one of the reputable brands in the field of furniture flooring.